Door handles with rosettes

Door handles with rosettes

The door handles with rosettes are supplied complete with screws and handle pins. These sets can therefore be placed directly on the door to replace existing handles or on new doors. When replacing existing handles it may be necessary to fill and finish the old screw holes. Replacing handles is therefore something that can coincide nicely with painting the doors. The rosettes on classic door handles are mounted loose in the classic way. They are therefore not spring-loaded (unless otherwise stated). Good locks do not normally require an auxiliary spring either.

Different styles of door handles

On this site you can find a wide range of different styles of door handles with rosettes. As a result, you can find the right handle for every interior. For the classic, industrial, modern and rural interior you can find sets of handles with handle rosettes that can be combined with other door and window fittings. Especially for the classic interior or the 1930s home, many models can be found. We are therefore experts in classic door fittings including the popular barrel model. In addition, we also have many bronze antique door handles in styles from the late nineteenth century and early twentieth century.

Replacing stools

Attempting to restore a 1930s home to its former glory and leaving 1970s door handles on the doors can partially undo much effort made. But even in a newer home, it pays to replace standard door handles from the time of construction with door handles with character. With a relatively simple intervention, you can already make a big difference. In many cases it is a matter of loosening a few screws and securing the rosettes with the screws provided. Should the new door handle need to cover an old rosette or door plate, it may be necessary to plug the old screw holes.

Finding and buying door handles on the site

In classic, country, industrial and modern styles, you can find handles with standard rosettes. These door handles come standard in pairs (unless otherwise noted). Most of the door handles on the site are made the authentic way. And they are in most cases also in the classic way not sprung and not fitted with a (modern) nylon ring. With solid locks, an auxiliary spring in the handle is normally not necessary either. Also, as was also not common in the past, a nylon ring is not necessary for the classic crutches.

All handles are supplied with an 8mm pin and with the rosettes are supplied with matching, classic screws. The handles are standard delivered with 8mm pins which are at least long enough for doors with a thickness of 40mm. On some models of door handles the pins will be longer and need to be shortened at 40mm door thickness. If you mention your door thickness as a comment when completing the order, we will adjust the pins for you, if necessary, so that they certainly fit at once.