Toilet faucet skip free-attached to outside open brass polish - inlet/bend

WC closure skip free-attached to outside open bronze antique - inlet/bend. A WC closure made of solid brass with a bronze antique finish. This 1930s closure can be used for toilet doors that open outward and can be used on either the left or right. This toilet closure was originally placed loose above the door handle where the over turn locks the door. The pin can be placed through a hole in the door without a lock where the pin through the door only allows the free/occupied plate to turn.

Dimensions of the WC closure overturn free-occupied outward open bronze antique - inlet/bend

The back plate of the over turn is 70mm wide and 50mm high. The free occupied part has a diameter of 60mm and a total height of 80mm. The toilet closure with toilet cover is supplied with the necessary screws in bronze antique, a free occupied plate, inlet plate and pin of 8mm.

This toilet lock is also suitable for use with a toilet lock in the door, however, this lock must be able to rotate 180 degrees and have sufficient distance from the door handle so that the over turn does not hit it (at least 70mm from the center of the toilet hole; which is usually not the case with standard fixed toilet locks).