WC closure free-standing brushed chrome - inlet/bend

Toilet latch free-movement brushed chrome- Toilet latchmade of solid brass with a brushed chrome finish. This 1930s closure can be used for toilet doors that open outward and can be used on either the left or right side.

Brushed chrome is excellent for use in wet areas.

The backplate of the over turn is 70mm wide and 50mm high. The vacant part has a diameter of 60mm and a total height of 80mm.

The toilet closure with toilet over turn is supplied with the necessary screws in nickel, a vacant plate, inlet plate and pin of 8mm.

This toilet closure was originally placed separately above the door handle where the over turn locks the door. The pin can be placed through a hole in the door without a lock whereby the pin through the door only allows the free/occupied plate to rotate.

This toilet lock is also suitable for use with a toilet lock in the door, however, this lock must be able to rotate 180 degrees and have sufficient distance from the door handle so that the turn-over does not collide with it (at least 60mm from the center of the toilet hole; which is usually not the case with standard fixed toilet locks).