Thief claws with locking sleeve hardened steel SKG** per 3 pieces (door)

Thieves' claws with locking pin hardened steel SKG** per 3 pieces (door) - DX Thieves' claws to prevent the removal of the door by loosening the hinges. The thieves claws are made of hardened steel and have an SKG** (two) approval.

The pin has a length of 50mm (+2mm pin) and a diameter of 11mm. The locking pin has an outer diameter of 18mm, inner diameter of 15mm and a depth of 17mm.

Per door, 3 thief's claws are recommended (for a window, 2 pieces are recommended). The pins are drilled into the hinge side (head side) of the door. With the pin on the pin, the center of the hole for the locking sleeve can be centered in the door frame (after assembly) after which a hole can be drilled with an 18mm drill bit.

Three pins and three locking sleeves are supplied.