Rosette for profile cylinder locks security hardware bronze antique 52mm

Rose for profile cylinder locks security hardware bronze antique. Round security rosette with a diameter of 52mm for a cylinder lock made of solid brass with a bronze antique color. The rosette cannot rust because it is made of solid brass. This set is therefore also suitable for outdoor use. On the outside, the rosette is mounted blind so that it cannot be removed from the outside. Because of the thickness of the rosette the cylinder lock is extra protected for a better burglary resistance.

Application of the rosette for profile cylinder locks

This set has no SKG approval, however, this does not say that it is less burglar-resistant. When used on an outside door we recommend using a profile cylinder with cylinder pull. In many cases this is less necessary for indoor applications. A profile cylinder lock with cylinder pull always provides better protection against burglary. With every security cylinder rose without cylinder pull we recommend using such cylinder locks. A security rosette with SKG approval and a SKG cylinder rosette with cylinder pull can also be found with the security cylinder rosettes in the web store.

Dimensions of the rosette for profile cylinder locks security hardware bronze antique

The round rosettes for both inside and outside have a diameter of approximately 53mm. The profile cylinder hole is 33mm high and the round part has a diameter of 17mm. The hole has standard dimensions for a standard profile cylinder lock. The thickness of the rosette on the inside is 9mm and the thickness of the rosette on the outside is 12mm. The center distance of the two bolts is 38mm which is also the standard distance where in most locks two holes are provided so that the bolts can pass through here for mounting. This complete set of rosettes for inside and outside comes with the two necessary, matching bolts for mounting on a door of 40mm. Optionally, you can also choose bolts suitable for doors 55mm-60mm thick or for 75mm-80mm (where the bolts can possibly be shortened by sawing them off for thicknesses under 75mm).