Slot insert 15 to 80 mm left and right RECTANGLE

Inset lock 15/20/25/30/35/40/45/50/60/70 or 80mm and has a brass colored or iron colored front plate with right angles - Lock to be used for furniture and interior construction. The locks with a size of 20mm, 25mm, 30mm and 35mm are supplied with an iron-colored front plate and the other sizes with a brass-colored front plate.

The distance/size is measured between the center of the key and the front of the lock in mm. The lock can be used for both left and right sides. The front plate is 12x75mm and the case is 9mm thick, 48mm high and the pin size +18mm deep. The center of the pin is 12mm above or below the center of the lock.

The lock is supplied with fasteners and without key.

! Note: The locks with a pin size of 60mm, 70mm and 80mm can only be used on the right and have a different size. The front plate is 12x68mm and the case is 9mm thick, 35mm high and the pin size +16mm deep. The center of the pin is 4.5mm below the center of the lock.

The standard keys (where eurobeard is listed in the specifications) on this site fit this lock can be found here (click here) with the exception of the keys with pin 4SL1429, 4SL2035, 4SL2034 and the keys with a French beard.