Classic ball bearing hinge with round corners bronze antique 76mm vase head

Classic ball bearing hinge with round corners bronze antique 76mm vase head. A ball bearing hinge with round corners that is made of brass in the color bronze antique. This classic hinge combines the beautiful design of an old-fashioned hinge with modern bearings. Therefore, these interior door hinges are also perfect to apply when remodeling or renovating a classic interior. The rounded corners make these hinges easier to mill in. The 76mm hinges are suitable for standard interior doors. For larger doors, we recommend the 90mm hinges.

The hinge is made of solid brass which prevents the surface from rusting. Because of this, this door hinge can in principle also be used on exterior doors. However, the door hinges are intended for indoor use and with outdoor use, especially with doors that turn outwards, the steel bearings can be affected over time.

Dimensions of the classic ball bearing hinge with round corners bronze antique 76mm vase head

The (bled) height of the hinge is 76mm and the total width unfolded is 76m. This size is also called 3 inches. The bled is made of 3mm thick solid brass and the sling has a thickness of about 13mm. The total height including the two vases is 122mm. The radius of the corners is 10mm. The screw holes are in the standard location for a 3 inch or 76mm hinge, so in many cases it can be mounted directly in place of existing hinges of the same size.

The hinge has 2 bearings and can be used left or right. Both vases are screwed tightly to the hinge so that the pin is locked in place and cannot easily come loose. This makes the hinge removable only by unscrewing both vases and tapping the pin out. However, because of the bearings, we do not recommend this.

This hinge comes with the necessary mounting screws in the color brass with Phillips head.